This article is also available in:

How to apply and update guides

The demonstration below shows how to apply all three interfaces, apply them again with TikTok only, then change the TikTok settings. It uses a 720 × 1280 sequence and the English Blinkl interface.



Watch the video on YouTube


Demonstration: open Vertical Preview, apply TikTok/Reels/Shorts, keep TikTok only, then change its reference variant and options.


Prepare your sequence


  1. Open your project in Premiere Pro and save it.
  2. Make a 9:16 sequence with square pixels active. Compatible resolutions include 720 × 1280, 1080 × 1920 and 2160 × 3840.
  3. Open Vertical Preview from Blinkl.


Capture a frame if you want to preview your video


Move the playhead to a representative image, then click Capture current frame. Frame capture is not automatic.


This step is optional when applying guides. Without a captured frame, the preview shows the guides over an empty background, as in the demonstration. To refresh an older image, move the playhead to the new position and capture again.


Apply all three interfaces


  1. Select TikTok, Reels and Shorts under Platforms.
  2. Choose Interface mode.
  3. Click Apply in Premiere.
  4. Check the result in the Program Monitor and on the guide tracks above your edit. Each platform has its own guide.


Keep TikTok only


Deselect Reels and Shorts, keep TikTok selected, then click Apply in Premiere again. Guides for the deselected platforms are removed; the TikTok guide remains in the sequence.


Change the TikTok settings


  1. Under Options per platform, choose TikTok.
  2. Select a Reference variant or customise the available options: description, audio, bottom module and other available elements.
  3. If needed, open the text settings to change the name, description or other guide text.
  4. Click Apply in Premiere to update the guide.


Changing a layout variant preserves your customised text. Changes stay local until you apply them. Pending changes indicates that your settings differ from the guides already applied. Revert settings restores the settings applied in Premiere.


Compare the zones


Choose Zones only or Common area to check the occupied areas. Click Apply in Premiere if you want to use this view in your edit.


Hide preview only changes the display in Blinkl. It does not remove guides from Premiere.


Remove all guides


Deselect every platform, then click Apply in Premiere. Check the timeline and Program Monitor afterwards.


Keep the files with your project


Keep the .vertical-preview folder next to your project when moving or archiving it. Earlier generations may still be used by another sequence or by the undo history.


If the project or sequence changes, use Refresh state and capture a new frame if you use one.

Updated on: 06/10/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!